NZXT H500 vs H510

NZXT is one of the most well-known brands in the world of cases, and they’ve earned a reputation as the greatest producer in the business. With its excellent build quality and impeccable engineering, its goods routinely beat competitors.

Furthermore, the characteristics of their goods demonstrate that the corporation invests a significant amount of time and money into fine-tuning every detail down to the last screw. In this post, we’ll compare and contrast two of the company’s top cases: the H500 and the H510.

 

Main Differences

The NZXT H510 is the successor of the NZXT H500, so the differences between the two PC cases are minimal. Thus, both models look a little different. In addition, the H510 has a USB Type-C port where the H500 only has a USB Type-A port.

 

Comparison – NZXT H500 vs H510

NZXT H500

NZXT H510

Mini-ITX

Micro-ATX

ATX

Power Supply Form Factor 

ATX

ATX

Maximum GPU Length

15.00" / 381 mm

15.00" / 381 mm

Maximum CPU Cooler Height

6.50" / 165 mm

6.50" / 165 mm

Maximum Radiator Size (Front)

11.02" / 280 mm

11.02" / 280 mm

Maximum Radiator Size (Rear)

 4.72" / 120 mm

 4.72" / 120 mm

2.5" Drive Bays

3

3

3.5" Drive Bays

3

3

PCI Slots

7

(full height)

7

(full height)

Fan Mounting (Front)

2 x 120 mm
or
2 x 140 mm

2 x 120 mm
or
2 x 140 mm

Fan Mounting (Rear)

1 x 120 mm
or
1 x 140 mm

1 x 120 mm
or
1 x 140 mm

Fan Mounting (Side)

Fan Mounting (Top)

1 x 120 mm
or
1 x 140 mm

1 x 120 mm
or
1 x 140 mm

Fan Mounting (Bottom)

Fans Included

2 x 120 mm

2 x 120 mm

Audio Input

1 x 3,5 mm

1 x 3,5 mm

Audio Output

1 x 3,5 mm

1 x 3,5 mm

USB Connections

2 x USB Type-A (USB 3.1 / USB 3.2 Gen 1),

1 x USB Type-A (USB 3.1 / USB 3.2 Gen 1),
1 x USB Type-C (USB 3.1 / USB 3.2 Gen 2)

Side panel window

Tempered Glass

Tempered Glass

Front panel window

Cable Management Space

0.91" / 23 mm

0.91" / 23 mm

Dimensions

8.27 x 18.11 x 16.85" /

210 x 460 x 428 mm

8.27 x 18.11 x 16.85" /

210 x 460 x 428 mm

Warranty

2 years

2 years

NZXT H500

NZXT H510

Mini-ITX

Mini-ITX

Micro-ATX

Micro-ATX

ATX

ATX

Power Supply Form Factor 

ATX

Power Supply Form Factor 

ATX

Maximum GPU Length

15.00" / 381 mm

Maximum GPU Length

15.00" / 381 mm

Maximum CPU Cooler Height

6.50" / 165 mm

Maximum CPU Cooler Height

6.50" / 165 mm

Maximum Radiator Size (Front)

11.02" / 280 mm

Maximum Radiator Size (Front)

11.02" / 280 mm

Maximum Radiator Size (Rear)

 4.72" / 120 mm

Maximum Radiator Size (Rear)

 4.72" / 120 mm

2.5" Drive Bays

3

2.5" Drive Bays

3

3.5" Drive Bays

3

3.5" Drive Bays

3

PCI Slots

7

(full height)

PCI Slots

7

(full height)

Fan Mounting (Front)

2 x 120 mm
or
2 x 140 mm

Fan Mounting (Front)

2 x 120 mm
or
2 x 140 mm

Fan Mounting (Rear)

1 x 120 mm
or
1 x 140 mm

Fan Mounting (Rear)

1 x 120 mm
or
1 x 140 mm

Fan Mounting (Side)

Fan Mounting (Side)

Fan Mounting (Top)

1 x 120 mm
or
1 x 140 mm

Fan Mounting (Top)

1 x 120 mm
or
1 x 140 mm

Fan Mounting (Bottom)

Fan Mounting (Bottom)

Fans Included

2 x 120 mm

Fans Included

2 x 120 mm

Audio Input

1 x 3,5 mm

Audio Input

1 x 3,5 mm

Audio Output

1 x 3,5 mm

Audio Output

1 x 3,5 mm

USB Connections

2 x USB Type-A (USB 3.1 / USB 3.2 Gen 1),

USB Connections

1 x USB Type-A (USB 3.1 / USB 3.2 Gen 1),
1 x USB Type-C (USB 3.1 / USB 3.2 Gen 2)

Side panel window

Tempered Glass

Side panel window

Tempered Glass

Front panel window

Front panel window

Cable Management Space

0.91" / 23 mm

Cable Management Space

0.91" / 23 mm

Dimensions

8.27 x 18.11 x 16.85" /

210 x 460 x 428 mm

Dimensions

8.27 x 18.11 x 16.85" /

210 x 460 x 428 mm

Warranty

2 years

Warranty

2 years

 

Dimensions and Compatibility

NZXT H500

NZXT’s Aero 120 mm fans are conveniently located at the rear and top of the H500, showingNZXT’ss purpose for the case, which is Negative airflow, which will pull in more dust but keep the GPU significantly cooler. There are also 22.5′′ tool-free drive sleds that connect to the power supply shroud with a simple squeeze of the side. The overall storage capacity is up to 22.5′′ and 23.5′′ disks, for a total of 4 storage bays, which should be plenty for the ordinary user.

The IO is located on the case’s top front and includes a power button, audio, mic, and two USB3.1 Gen 1 ports. A 120/140 mm fan port is included on the top of the case, with a nice mesh filter between the casing and the pre-installed NZXT Aero 120mm fan on the interior.

 

NZXT H510

Looking insideit’s’s also one of the most basic ATX cases, with a huge top compartment that can house up to an ATX motherboard, GPUs up to 14.5 inches (360mm), and CPU coolers up to 6.5 inches (165 mm) tall. Up to two 140 mm, fans or a 280 mm radiator may be mounted on the front of the case, and the bracket can be removed for easy installation.

A 120mm fan may be mounted on the back exhaust, and a 140 mm spinner can be mounted on the top. Two 120mm Aer F fans are supplied, one for the intake and one for the exhaust.

 

Cable Management

NZXT H500

Cable management is restricted by plastic channels with built-in velcro ties, which are quite narrow (19-23mm according to the spec sheet). The channels can be removed for more space, but with the velcro and cable tie points, everything should be able to be strapped down firmly enough that this is not essential. A certain amount of neatness is required: the side panel will not handle all of the work of securing large tangles of cables.

View the H500 on Amazon

 

NZXT H510

On the NZXT cases, there are no cuts with rubber grommets; instead, there is a wide cable routing slot neatly concealed NZXT’sT’s signature cable bar. If you pick a model which is not jet black, the cable bar will usually be a contrasting color, which is an aesthetically pleasing aspect.

However, it’s not just about appearances here. The cable bar not only covers the wires but also serves as a place to install your water-cooler reservoir. This cable bar may also be removed totally if you require more room inside the case.

View the H510 on Amazon

 

 

Optics

NZXT H500

The H500 has a tempered glass side panel that runs the length of the case from the top to the PSU shroud in the lower third. The glass is held in place on the rear of the case by a single thumbscrew, making removal quick and easy.

The front of the casing is nearly blank, with only a NZXT wordmark in the bottom left corner. You’d expect a contemporary case design that prioritizes space. There are no optical bays. The motherboard, fan, expansion, and power supply are all located on the back of the chassis. Even on a thick carpet, the H500 has chunky feet that give considerable height and hence ample airflow.

 

NZXT H510

Despite its simplicity, you can deal with an NZXT case thanks to the crisp box-like corners and a short slither of visible ventilation. The bottom quarter of the tempered glass panel is really part of the PSU shroud, leaving the glass fully independent from the rest of the chassis.

Everything about tH510s’ss’s elegant design is precise and tidy. When paired with the unbroken tempered glass panel, the professional exterior looks fantastic. Furthermore, the cable bar and PSU shroud contribute to its interior’s clean appearance, giving even unskilled builders something to be proud of.

 

Cooling

NZXT H500

NZXT has added a fan cage to the front of the case, which will make testing multiple configurations, both liquid and air-cooled models, as well as routine maintenance, much easier. NZXT has also added two 120mm Aero Fans, one in the top and one in the back, to expel air from the case. A 120/140mm fan port is included on the top of the case, with a nice mesh filter between the casing and the pre-installed NZXT Aero 120mm fan on the interior.

View the H500 on Amazon

 

NZXT H510

The two 120mm spinning fans provided with the H510 are non-RGB and do not support PWM. Their maximum speed is limited to around 1250 RPM, which is not particularly high but does provide pleasant, silent performance. They spin at a low speed of around 550 RPM, which produces a small amount of motor noise at idling.

View the H510 on Amazon

 

Price

Unfortunately, there is no way to check the price of the NZXT H500 currently since this line of PC cases has been discontinued in favor of the production of the NZXT H510.

The NZXT H510 on Amazon is surprisingly only $74.9It’st’s surprising since this particular case is so good compared to other cases in its category. For the reasonable price of $74.99, users will get a big bang for their buck when they invest in the NZXT H510.

 

Conclusion – NZXT H500 vs H510

For a low price, the NZXT H500 has a smart, modern desigBuilders’rs’ demands have been carefully considered, with great cable routing choices and lots of areas to work with. The performance of the H500 is more than acceptable. The H500 is a simple recommendation to give because it has no major drawbacks and excellent user evaluations.

The NZXT H510 is one of the cleanest-looking cases on the market right now. This entry-level model nonetheless provides excellent value for money. The H510, like its predecessor, is a robust casing with well-built components and dependable materials throughout.

However, if you plan on adding an AIO or more fans, the H510i is the way to go. Everything will look fantastic inside this NZXT case, from water cooling to budget builds; it is genuinely a mid-tower for everyone. The NZXT H510 is ideal for both novice and experienced builders.

Laura

Passionate author at TechVert.com. Loves science and books. In a relationship with her cats.

Leave a Comment