Networking reliability is crucial when you’re playing online games or watching movies online. This is where the effect of an excellent router is always felt. You’ll never be thrown out of a game due to network troubles if you have a router with high-speed internet and excellent stability. Depending on your demands, you can obtain enough bandwidth to connect several devices or stream movies in 4K resolution.
The TP-Link AC1200 is a low-cost dual-band router with certain capabilities seen on higher-priced devices, but its performance lags behind the competition somewhat.
The AC1750 from TP-Link is a low-cost router that functions like a more costly one. It comes with four Gigabit LAN connections and two USB 2.0 connectors, which is a fantastic feature set.
This post will explain the differences between AC1200 and AC1750 and much more to potential purchasers. This will give you peace of mind while purchasing your new router.
Main Differences
The only big difference between the AC1200 and AC1750 is their speed. Now it’s up to the buyer to decide which option is better for them. The AC1750 is strongly recommended for future-proofing because it delivers faster speeds on both the 2.4 and 5 GHz bands.
Comparison – TP-LINK AC1200 vs AC1750
TP-LINK Archer AC1200 (A6) | TP-LINK Archer AC1750 (A7) | |
 |  | |
Wi-Fi 4 | IEEE 802.11 n/b/g 2.4 GHz | IEEE 802.11 n/b/g 2.4 GHz |
Wi-Fi 5 | IEEE 802.11 ac/n/a 5 GHz | IEEE 802.11 ac/n/a 5 GHz |
Wi-Fi 6 | ||
WiFi Speeds | 5 GHz: 867 Mbps (802.11 ac) | 5 GHz: 1300 Mbps (802.11 ac) |
External Antennas | 4 | 3 |
Processor | Dual-Core CPU | Qualcomm CPU |
WAN Ports | 1 | 1 |
LAN Ports | 4 | 4 |
USB Port | 0 | 1 (USB 2.0) |
Wi-Fi On/Off Button | ||
Power On/Off Button | ||
WPS/Reset Button | ||
WiFi Encryption | WPA | WPA |
SPI Firewall | ||
Access Control | ||
IP & MAC Binding | ||
Application Layer Gateway | ||
IPv4 | ||
IPv6 | ||
Dual-Band Trechnology | ||
External Memory Slot | ||
DNS Relay | ||
Dimensions | 8.5" x 4,6" x 1.2" / 21,50 x 11,70 x 3,20 cm | 9.6" x 6,4" x 1.3" / 24,30 x 16,06 x 3,25 cm |
Warranty | 2 years | 2 years |
TP-LINK Archer AC1200 (A6) | TP-LINK Archer AC1750 (A7) |
| | |
Wi-Fi 4 IEEE 802.11 n/b/g 2.4 GHz | Wi-Fi 4 IEEE 802.11 n/b/g 2.4 GHz |
Wi-Fi 5 IEEE 802.11 ac/n/a 5 GHz | Wi-Fi 5 IEEE 802.11 ac/n/a 5 GHz |
Wi-Fi 6 | Wi-Fi 6 |
WiFi Speeds 5 GHz: 867 Mbps (802.11 ac) | WiFi Speeds 5 GHz: 1300 Mbps (802.11 ac) |
External Antennas 4 | External Antennas 3 |
Processor Dual-Core CPU | Processor Qualcomm CPU |
WAN Ports 1 | WAN Ports 1 |
LAN Ports 4 | LAN Ports 4 |
USB Port 0 | USB Port 1 (USB 2.0) |
Wi-Fi On/Off Button | Wi-Fi On/Off Button |
Power On/Off Button | Power On/Off Button |
WPS/Reset Button | WPS/Reset Button |
WiFi Encryption WPA | WiFi Encryption WPA |
SPI Firewall | SPI Firewall |
Access Control | Access Control |
IP & MAC Binding | IP & MAC Binding |
Application Layer Gateway | Application Layer Gateway |
IPv4 | IPv4 |
IPv6 | IPv6 |
Dual-Band Trechnology | Dual-Band Trechnology |
External Memory Slot | External Memory Slot |
DNS Relay | DNS Relay |
Dimensions 8.5" x 4,6" x 1.2" / 21,50 x 11,70 x 3,20 cm | Dimensions 9.6" x 6,4" x 1.3" / 24,30 x 16,06 x 3,25 cm |
Warranty 2 years | Warranty 2 years |
Performance
A 750MHz SoC processor powers the Archer A6, a 2×2 AC1200 router. On the 2.4GHz band, it can achieve speeds of up to 300Mbps, and on the 5GHz band, it can reach speeds of up to 867Mbps. This router supports MU-MIMO and beamforming but not automated band steering, and it runs on 802.11ac Wave 2 technology.
The Archer C7 is a dual-band AC1750 router with a 720MHz processor. It has a 2.4GHz band speed of up to 450Mbps and a 5GHz band speed of up to 1,300Mbps. The container is shiny black and measures 9.6 by 6.4 by 1.3 inches. Three replaceable, adjustable antennae are located on the back of the router.
Features
AC1200
The Archer A6 includes four non-removable antennas and a textured glossy black casing that measures 1.4 by 9.1 by 5.7 inches. LED status indicators for power, radio bands, Ethernet, Internet, and WPS, are located along the top front edge. Reset, power, and WPS buttons, as well as four gigabit LAN ports, a WAN port, and a power jack, are all located on the back panel.
The TP-Link Tether mobile app allows you to access basic Wi-Fi and security settings, activate or disable parental controls, conduct basic diagnostics, and arrange guest networking, but advanced options must be accessed through an online portal.
The online portal provides a network map with the number of wired and wireless customers as well as the status of your internet connection. The Quick Setup, Basic, and Advanced tabs are on the top, and a settings menu is on the left. Internet, Wireless, Parental Controls, Guest Network, and TP-Link Cloud settings are all found under the Basic menu.
Create accounts for family members to prohibit access to certain sites based on keywords, establish internet time limits, and view all visited sites using Parental Controls. Guest networking allows you to create a distinct network with unique SSIDs and passwords for visitors, and the TP-Link Cloud allows you to manage your network and client devices from anywhere over the internet.
Internet, Wireless, Parental Controls, and Guest Network options, as well as Quality of Service (QoS), Security, NAT Forwarding, IPv6, and VPN Server settings, are all available in advanced settings.
AC1750
There are two USB activity LEDs, an On/Off button, a Reset/WPS switch, and a Wi-Fi On/Off switch. Power, both radio bands, all four LAN ports, the WAN port, and WPS activity are all shown via LED indicators on the router’s front panel.
The web console on the original TP-Link Archer C7 is an older, text-based version that lacks the graphical aspects seen on current TP-Link routers. There’s also a notable time difference between when you make a modification and when it’s saved. It does, however, provide a wide range of basic and sophisticated options.
On the left side of the main Status page is a list of options, and in the middle is LAN, WAN, Wireless, and Traffic Statistic information. A thorough description of each setting is located to the right. WAN, LAN, MAC Clone, and IPTV choices are available in the network settings, and each radio band offers basic wireless settings (SSID, Mode), as well as WPS, Security (WPA/WPA2 Person and Enterprise), and MAC filtering options.
The Guest Network tab enables you to build different networks for visitors with restricted access, as well as specify bandwidth limits and access schedules for each network. You may set access schedules and generate a list of approved websites for certain customers in Parental Controls. There’s also a second Access Control option that lets you set internet access controls for the whole network.
Advanced Routing, Bandwidth Control, Port Forwarding, and Port Triggering, VPN Pass-Through and Firewall settings, and Dual-Band Selection, which allows you to enable and disable each radio band, are among the other options. Change the time, conduct network diagnostics, upgrade the router’s firmware, back up settings, and see system logs under System Tools.
There are two USB activity LEDs, an On/Off button, a Reset/WPS switch, and a Wi-Fi On/Off switch. Power, both radio bands, all four LAN ports, the WAN port, and WPS activity are all shown via LED indicators on the router’s front panel.
The web console on the original TP-Link Archer C7 is an older, text-based version that lacks the graphical aspects seen on current TP-Link routers. There’s also a notable time difference between when you make a modification and when it’s saved. It does, however, provide a wide range of basic and sophisticated options.
On the left side of the main Status page is a list of options, and in the middle is LAN, WAN, Wireless, and Traffic Statistic information. A thorough description of each setting is located to the right. WAN, LAN, MAC Clone, and IPTV choices are available in the network settings, and each radio band offers basic wireless settings (SSID, Mode), as well as WPS, Security (WPA/WPA2 Person and Enterprise), and MAC filtering options.
The Guest Network tab enables you to build different networks for visitors with restricted access, as well as specify bandwidth limits and access schedules for each network. You may set access schedules and generate a list of approved websites for certain customers in Parental Controls. There’s also a second Access Control option that lets you set internet access controls for the whole network.
Advanced Routing, Bandwidth Control, Port Forwarding, and Port Triggering, VPN Pass-Through and Firewall settings, and Dual-Band Selection, which allows you to enable and disable each radio band, are among the other options. Change the time, conduct network diagnostics, upgrade the router’s firmware, back up settings, and see system logs under System Tools.
Ports
There are four gigabit LAN connections and a single WAN port on the TP-Link AC1200.
Also, there are four Gigabit LAN ports, one Gigabit WAN port, and two USB 2.0 ports on the TP-Link AC1750.
Price
The prices for the TP-Link AC1200 and AC1750 aren’t as steep as people would expect. With the AC1200 only costing $39.99 and the AC1750 only costing $49.99, users will get some pretty good coverage and fast internet speeds while using these TP-Link products.
For under $100, these two products from TP-Link can be considered top-tier routers. Not only do they perform well for their affordable price tag, the aesthetics and software are also commendable for users on a budget.
Conclusion – TP-LINK AC1200 vs AC1750
As the name implies, AC1200 may deliver a total theoretical speed of 1200 Mbps. On the 2.4 GHz band, it can deliver 300 Mbps, and on the 5 GHz band, it can deliver 867 Mbps. The AC1750, on the other hand, has a total maximum speed of 1750 Mbps. On the 2.4 GHz band, it can give 450 Mbps, and on the 5 GHz band, it can deliver 1300 Mbps.
The TP-Link AC1200 is a good option if you need a cheap Wi-Fi router for your dorm room, apartment, or small house. Although you won’t receive blistering 2.4GHz throughput, its decent 5GHz performance should be enough to handle your video-streaming and online gaming needs. The online interface has a lot of administrative features, such as parental controls and QoS settings. However, there is no virus protection.
The TP-Link AC1750 Wireless Dual Band Gigabit Router (V2) may be under $100, but its performance and feature set belie its price. It outperformed comparable priced cheap versions in terms of 2.4GHz and 5GHz throughput. It has a lot of administration options and a lot of I/O ports. However, the TP-Link AC1750 user interface should be improved, and file-transfer performance might be improved. It is, nevertheless, the fastest dual-band router in its category.
The only big difference between the AC1200 and AC1750 is their speed. Now it’s up to the buyer to decide which option is better for them. The AC1750 is strongly recommended for future-proofing because it delivers faster speeds on both the 2.4 and 5 GHz bands.
